| |
|
|
|
| 1. The Spa is delivered on the lorry |
2. Spa is placed in final position and covers removed | 3.
Spa with covers removed | 4. Waterproof electrical isolator
switch next to the spa. We strongly recommend you have one of these fitted by
a qualified electrician |
| |
|
|
|
| 5. The armoured cable which brings electric
to the spa. Recommended that this is installed by a qualified electrician |
6. The control panel is wired up by ourselves and ozone generator
fitted |
7. A hose pipe is then used to fill the spa up with
normal water | 8. A kit is supplied with each new spa. Contains
chemicals to keep your spa and it's water in top condition |
| |
|
|
|
| 9. Once all the wiring is in place and the
water is in, the control panel can be sealed and the redwood
steps put in place. Then just wait for the water in the spa to reach your
desired temperature | 10. When up to your desired temperature,
you can turn on the jets then just sit back & relax | 11.
If you can then pull yourself away from the enjoyment & relaxation of your
new spa, you can then put the cover on to keep in the
heat and keep out the dirt | 12. But if you just can't resist
the temptation, all you have to do is pull back the cover and jump in again |
